Below are some possible causes and solutions.
A reader is connected after starting the time recorder
Be sure to start the time recorder after connecting the authentication reader.
Reader is not authenticated due to poor contact
In this case, reconnecting the cable to another USB port may resolve the issue. If you have to constantly re-plug when restarting the PC , you can eliminate it by disabling selective suspend.
Insufficient power due to USB hub connection
If the device is connected via USB via a hub, the power supply may be insufficient and the reader may not function. In this case, please connect to the USB port of the PC or use a self-powered hub.
Driver not installed
Check if the driver has been installed correctly in the following places.
Windows Start Button> Control Panel> Programs and Features
・Digital Persona Data Format Conversion RTE
・DigitalPersona One Touch for WindowsRTE
・DigitalPersona Gold Fingerprint recognition Software3.2.0
The driver is broken
After removing the driver from Control Panel> Programs and Functions, reinstall it according to the time clock manual.
Leader failure due to internal disconnection, or other reasons
We accept verification at the support center. Sorry to trouble you, but please contact us from the inquiry form .