Skip to main content

Types and characteristics of time recorders

There are the following types of time recorder. Please use the one that suits your environment.

 

Type of time clock

 

 

PC connection type time recorder

Fingerprint authentication

_______.png

Since it is an area type, it is easy to use without being affected by how you slide your finger, and it is suitable for an attendance management system with extremely high performance. It is necessary to install the dedicated application on the shared PC.

 

Finger vein recognition

It is often used in occupations with a high level of security. It is an authentication method that is not easily affected by injuries or skin conditions. It is necessary to install the dedicated application on the shared PC.

 

Finger hybrid authentication

It is a state-of-the-art authentication method that reads fingerprint information and finger vein information at the same time without contact. Highly accurate identity verification can be performed. It is necessary to install the dedicated application on the shared PC.

  

IC card authentication

In addition to the various transportation FeliCa cards (Suica, Pasmo, Edy) that you carry every day, you can stamp by simply holding a card such as MIFARE that is used for employee ID cards and taspo. It is necessary to install the dedicated application on the shared PC.

 

Password authentication

All you have to do is select a name and enter your password. Since it does not use an authentication device, it is easy to set up and can be used if only a PC is prepared. It is necessary to install the dedicated application on the shared PC. 

Return to top of screen

 

iPad version time recorder

Face recognition

Please install and use the face recognition time recorder application that uses the face recognition AI engine "NeoFace" on the prepared iPad. It's space-saving, and you can easily make stamps just by taking a picture of your face with the built-in camera of the iPad.

  

Chameleon code authentication

You can install a dedicated application on the iPad and simply hold the next-generation 2D color code "Chameleon Code" over the camera built into the iPad to perform engraving. Depending on the settings, it is possible to prevent improper stamping because it is possible to disable stamping without taking a picture of the face.

* It is not determined whether the face is the person himself / herself. It depends on whether or not the "face" is reflected. You can check the image taken at the time of stamping from the management screen. Please confirm the identity from the image on the management screen.

Return to top of screen

 

Dedicated terminal for stamping

Pit Touch Pro 2

It is a terminal dedicated to stamping that does not require a PC connection and is equipped with a touch panel type LCD screen. Stamp with an IC card. It supports wired LAN, wireless LAN, and 3G communication, and can be used according to each environment. It arrives with the settings completed, so there is no need for difficult initial settings.

* An IC card reader and a Windows PC are required to register the IC card.

 

BT-2500

BT2500.jpg

It is a dedicated stamping terminal that does not require a PC connection and is equipped with two authentication methods, finger hybrid authentication and IC card authentication. Since authentication registration can be performed from the BT-2500 main unit, there is no need to prepare a reader for registration.


The network connection also supports wired LAN and wireless LAN. It arrives with the settings completed, so there is no need for difficult initial settings.

 

Pit-21A

Pit-21A.png

It is a portable type stamping terminal equipped with a touch panel LCD. Stamp with an IC card. No PC connection is required, and you can complete everything from IC card registration to stamping with this single terminal. It has a space-saving design and can be carried around by using an optional battery.

 

Return to top of screen

 

Web browser recorder

Cloud recorder

Since you only access the URL issued for each division, there is no need for difficult setup work. All you have to do is select a name and enter your password. You can check the stamp history and attendance status of other employees.

  

My recorder

 

It is a personal time recorder that can be used on smartphones, tablets, and PCs. Access a specific URL and enter your login ID and password to log in. Just click the button to go to clock in, clock out and you can make a stamp. Since you can also get location information at the time of stamping, you can also check where you stamped.

  

Mobile browser recorder

A personal time recorder that can be used with feature phones and smartphones. You don't need a login ID or password because you only need to access the URL issued for each individual. You can also get location information at the time of stamping.

Return to top of screen

 

Smartphone app

image_22.png

It is a personal time recorder app (for smartphones) that allows you to set the location where you can stamp with the administrator app, and check the attendance stamp, error work / forgetting stamp notification with the employee app. Launch the app and enter your login ID and password to log in. Just tap the button to go to clock in/ clock out and you can make a stamp. Since you can also get location information at the time of stamping, you can also check where you stamped.

Return to top of screen

 

Tablet app

It is a time recorder app for your division that can be used on iPad and Android tablets. It can be stamped with a QR code or password authentication. All employees can be stamped without registering help (stamping division is recorded as their own division).

Return to top of screen

 
Return to top of page
Was this article helpful?
8 out of 11 found this helpful