You can change the settings on the Pit Touch Biz Web management screen.
The login procedure to the Web management screen differs depending on whether the network settings for Pittouch Biz are "DHCP (automatic IP address allocation)" or "IP address fixed".
Please refer to the procedure according to your setting.
Table of contents
*Even if you are using DHCP and you know the assigned IP and your PC is in the same network address as Pittouch Biz, please refer to the case of fixed IP address . (For the set IP address, please check with the person in charge of your network)
DHCP (IP address automatic allocation)
When the Pittouch Biz network setting is DHCP, it is necessary to connect the Pittouch Biz main unit and the PC with a LAN cable.
[Connection procedure]
1. Unplug the Pit Touch Biz power plug and turn on DIP switches 1 and 2 on the back of the main unit.
2. Connect the PC and the main unit with a LAN cable, and insert the power plug of Pit Touch Biz.
3. From the control panel on your PC, go to the Network and Sharing Center.
4. In Network and Sharing Center, change adapter options> Open Ethernet (Local Area Connection) Properties.
5. Open Internet Protocol Version 4 Properties.
6. Check "Use the following IP address", enter the IP address "192.168.1.1", and press [OK]. * The subnet mask value is automatically entered.
7. Start the Internet browser on your PC, type "http://192.168.1.2" in the address bar, and press the "Enter" key.
8. The login dialog is displayed. Enter the following.
Username: admin Password: kot
* The above is the password for delivery. If you have changed it, please enter the new password.
*If you forget your new password, please contact our support center.
If you have access to the web administration screen, see Web administration screen settings .
IP address fixed
If the Pittouch Biz network settings are fixed to the IP address, you can directly log in to the Web management screen from a PC in the same network.
* Even with DHCP, if you know the assigned IP address, you can log in using the following procedure.
[Connection procedure]
1. Start the Internet browser on the PC, enter "https://(the set IP address)" in the address bar, and press the "Enter" key.
2. The login dialog is displayed. Enter the following.
Username: admin Password: kot
* The above is the password for delivery. If you have changed it, please enter the new password.
*If you forget your new password, please contact our support center.
If you have access to the web administration screen, see Web administration screen settings .
Settings on the Web management screen
The following settings can be made on the Web management screen.
- Division settings
- Network settings
- Time setting
Division settings
Change the division set for Pit Touch Biz in the transmission parameter settings.
1. On the KING OF TIME management screen, check the ID of the time recorder to which you want to change. Management screen> Settings> Organization> Time recorder settings
2. Rewrite the value of timerecorder_id= described in [Server communication]> [Send parameter settings]> [Format] in the Web management screen to the time recorder ID of the organization to be changed.
3. After changing the above, click [Settings] at the top of the screen.
4. The screen will transition, and then click Restart, the pit touch-Biz restart you.
<Network settings>
You can change the network information to connect Pittouch Biz. Please confirm the setting contents with the person in charge of the network before operating.
1. The following settings can be made in [LAN port settings] from the menu on the left side of the Web management screen.
- IP address acquisition method Manual/Automatic (DHCP)
- IP address *1
- Subnet mask *1
- Gateway address *1
- Primary DNS *2
- Secondary DNS *2
*1...No setting is required if the IP address acquisition method is automatic (DHCP).
*2... Setting is not required if the IP address acquisition method is automatic (DHCP), but if entered, the setting value will take precedence.
2. After changing the above, click [Settings] at the top of the screen.
3. The screen will transition, and then click Restart, the pit touch-Biz restart you. If there are multiple changes, restart them after making all changes.
<Time setting>
You can set the NTP server (time adjustment server).
1. Go to [Time Setting] from the menu on the left side of the Web management screen. You can set the NTP server by host name or IP address. Please confirm the setting contents with the person in charge of the network before operating.
2. After setting, click [NTP server setting].
3. The screen will transition, and then click Restart, the pit touch-Biz restart you. If there are multiple changes, restart them after making all changes.
Reboot
You will hear a startup sound when the system is restarted. If the IP address is fixed, the procedure is over. For DHCP, also check the following procedure.
Unplug the power plug and LAN cable, and set DIP switches 1 and 2 on the back of the main unit to "OFF".
Please install it again in the stamping place.
Note
If you have changed the network settings of the PC such as DHCP, be sure to restore the original settings.